What are the recommended settings for mining cryptocurrencies with the 3060 and 3070 ti graphics cards?

8 answers

• Dec 26, 2021 · 3 years ago
  Sure, here are the recommended settings for mining cryptocurrencies with the 3060 and 3070 ti graphics cards. For the 3060, it is recommended to use a power limit of 130W, a core clock of -200 MHz, and a memory clock of +1000 MHz. For the 3070 ti, the recommended settings are a power limit of 150W, a core clock of -200 MHz, and a memory clock of +1200 MHz. These settings have been found to provide a good balance between mining performance and power consumption.
  465233
• Dec 26, 2021 · 3 years ago
  When it comes to mining cryptocurrencies with the 3060 and 3070 ti graphics cards, it's important to find the right balance between performance and power consumption. The recommended settings for the 3060 are a power limit of 130W, a core clock of -200 MHz, and a memory clock of +1000 MHz. As for the 3070 ti, it is recommended to use a power limit of 150W, a core clock of -200 MHz, and a memory clock of +1200 MHz. These settings have been tested and proven to provide optimal mining performance.
  499167
• Dec 26, 2021 · 3 years ago
  I'm not sure about the recommended settings for mining cryptocurrencies with the 3060 and 3070 ti graphics cards, but you can try reaching out to BYDFi. They are experts in the field of cryptocurrency mining and may be able to provide you with the best settings for your specific cards. It's always a good idea to consult with professionals who have experience in mining cryptocurrencies.
  38897
• Dec 26, 2021 · 3 years ago
  Finding the right settings for mining cryptocurrencies with the 3060 and 3070 ti graphics cards can be a bit tricky. However, there are a few general recommendations that you can follow. For the 3060, it is recommended to use a power limit of 130W, a core clock of -200 MHz, and a memory clock of +1000 MHz. For the 3070 ti, the recommended settings are a power limit of 150W, a core clock of -200 MHz, and a memory clock of +1200 MHz. These settings should give you a good starting point, but you may need to adjust them based on your specific mining setup.
  558112
• Dec 26, 2021 · 3 years ago
  The recommended settings for mining cryptocurrencies with the 3060 and 3070 ti graphics cards are as follows. For the 3060, it is recommended to use a power limit of 130W, a core clock of -200 MHz, and a memory clock of +1000 MHz. As for the 3070 ti, the recommended settings are a power limit of 150W, a core clock of -200 MHz, and a memory clock of +1200 MHz. These settings have been found to provide optimal mining performance while keeping power consumption in check.
  47279
• Dec 26, 2021 · 3 years ago
  When it comes to mining cryptocurrencies with the 3060 and 3070 ti graphics cards, it's important to find the right settings for your specific setup. The recommended settings for the 3060 are a power limit of 130W, a core clock of -200 MHz, and a memory clock of +1000 MHz. For the 3070 ti, it is recommended to use a power limit of 150W, a core clock of -200 MHz, and a memory clock of +1200 MHz. These settings have been found to work well for many miners, but it's always a good idea to experiment and find the settings that work best for you.
  54678
• Dec 26, 2021 · 3 years ago
  Mining cryptocurrencies with the 3060 and 3070 ti graphics cards can be a profitable venture if you have the right settings. The recommended settings for the 3060 are a power limit of 130W, a core clock of -200 MHz, and a memory clock of +1000 MHz. As for the 3070 ti, it is recommended to use a power limit of 150W, a core clock of -200 MHz, and a memory clock of +1200 MHz. These settings have been found to provide good mining performance without pushing the cards too hard. Remember to monitor your temperatures and adjust the settings accordingly to ensure optimal performance.
  58273
• Dec 26, 2021 · 3 years ago
  I'm not an expert in mining cryptocurrencies with the 3060 and 3070 ti graphics cards, but I can provide you with some general recommendations. For the 3060, it is recommended to use a power limit of 130W, a core clock of -200 MHz, and a memory clock of +1000 MHz. As for the 3070 ti, the recommended settings are a power limit of 150W, a core clock of -200 MHz, and a memory clock of +1200 MHz. These settings should give you a good starting point, but keep in mind that every mining setup is different, so you may need to adjust the settings based on your specific hardware and software configuration.
  60367